Made To Measure Copper Worktops, Sinks and Drainers

Please NOTE: Made to measure items do not have free delivery.

Delivery charges for made to measure items are shown separately on our quotation.

Made to Measure Copper Worktops from £468 per linear metre inc VAT

Worktop Specification:

Grade C106 H/H 1.2mm thick Copper bonded onto a moisture resistant MDF core.
Generally all seen edges are folded over then back underneath forming a 13mm safety edge.
All corners are welded and cleaned.

Made to Measure Copper Worktops
Made to Measure Copper Worktops with Island
Made to Measure Copper Worktops showing corner

 

Options for front edge profiles Options for rear edge profiles

Standard Square edge profile
21mm to 60mm thick
MPM001

MPM001 From £468 PLM
inc. VAT

Standard Square rear edge Breakfast Bar
21mm to 200mm thick
MPM004

MPM004 From £102 PLM
inc. VAT

Standard Square edge profile
61mm to 200mm thick
MPM002

MPM002 From £504 PLM
inc. VAT

Rear edge integrated up-stand
50mm or 100mm
MPM005

MPM005
50m From £102 PLM inc. VAT
100m From £144 PLM inc. VAT

To obtain a quotation for your made to measure worktop either: contact ( email) mpm-engineering or telephone: 01582-582811.

 

Additional options:

  1. To cut a hole for a sink or drainer
  2. Mechanical corner or straight slot joint
  3. On site templating available
  4. On site installation available

 

Sinks and Drainers

 

Square copper corner sink

 

Square corner sink

 

(All prices below include welding integration cost)

CSMPM-100-34 - 340 x 400 x 170 Deep @ £440 +VAT

CSMPM-100-40 - 400 x 400 x 170 Deep @ £520 +VAT

CSMPM-100-45 - 450 x 400 x 170 Deep @ £550 +VAT

CSMPM-100-50 - 500 x 400 x 170 Deep @ £610 +VAT

CSMPM-100-55 - 550 x 400 x 170 Deep @ £650 +VAT

Sink with drainer

 

Sink with Drainer

 

(All prices below include welding integration cost)

CSMPM-500D

O/A Size 900 x 400

Bowl 500 x 400 x 170 Deep @ £820 +VAT

Square corner half sinks

 

Square corner half sinks

 

(All prices below include welding integration cost)

CSMPM-100-20 - 200 x 400 x 170 Deep @ £360 +VAT

 

 

Made to Measure Copper Worktop with Belfast Sink
Made to Measure Copper Worktop with Sink
Made to Measure Copper Worktop with Sink
Made to Measure Copper Bartop

To obtain a quotation for your made to measure worktop either: contact ( email) mpm-engineering or telephone: 01582-582811.

Our worktops are manufactured from grade C106 H/H 1.2mm copper which are mounted on moisture resistant MDF core to give added support and easy fixing to the base cupboards. As MPM have achieved FSC accreditation all the timber used within our products comes from sustainable sources. We have the ability of fully integrating our copper under mount sinks including some with drainers. Please see individual sink bowl details for sizes. Individual copper worktop lengths are governed by the sheet blank size available which is 2.40 metres. Our worktops can incorporate drainer grooves, built-in upstands along with hob cut outs and slot joints. Please feel free to contact our design team either by email or Tel: 01582 582811 to discuss our made to measure service.

Construction: Manufactured from grade C106 H/H 1.2mm copper.

We have considered all aspects of both commercial and domestic copper worktop design when creating our copper kitchen worktops. We offer a free of charge design service working closely with our customers to manufacture copper worktops to fit their individual needs.

Storage of copper worktops: We recommend that the plastic coating protecting the copper must be left intact until installation is completed.

Templating of copper worktops: We offer a full templating service for our copper worktops. Our fitters will visit your premises and produce workable templates which your worktops will be manufactured from. Please ask for templating prices.

Fitting copper worktops: We offer an installation service for our worktops but we do not undertake any plumbing, gas or electrical connections. Please ask for prices. Copper worktops should only be fitted in areas that experience normal cooking ranges of temperature and humidity. Care should be taken in newly built areas to ensure a stable atmosphere. All windows/doors should be in place, plasterwork fully dried and major works completed prior to installation.

Cleaning and care for copper worktops: Chlorides such as bleach or common salt and acids of any kind can damage copper surfaces. If a spillage occurs rinse immediately and thoroughly with plenty of fresh water and then dry with a soft cloth. To maintain the best appearance of your copper worktops, only use warm water and a mild detergent ensuring that the surface is rinsed thoroughly and then dried with a soft cloth. Copper will oxidise over time and will discolour by varying degrees. Most people accept this will happen and like the different patinas that appear (ring marks discolouration etc.) Copper can be returned to a flat finish by using a specific copper cleaner or similar products.

IMPORTANT: Care should be taken when handling and installing these products. For your safety, we recommend that hands are protected from unfinished edges and corners.

This is the basket Message

This is the basket Message