Made To Measure Stainless Steel Worktops

Please NOTE: Made to measure items do not have free delivery.

Delivery charges for made to measure items are shown separately on our quotation.

Made to Measure Stainless Steel Worktops from as little as £270 per linear metre inc VAT

Worktop Specification:

Grade 304 1.2mm thick silicone finish brushed stainless steel bonded onto a moisture resistant MDF core.
Generally all seen edges are folded over then back underneath forming a safety edge.
All corners are welded and re grained.

Made to Measure Stainless Steel Worktops
Made to Measure Stainless Steel Worktops with Island
Made to Measure Stainless Steel Worktops showing corner

 

Options for front edge profiles Options for rear edge profiles

Standard Square edge profile
21mm to 60mm thick
MPM001

MPM001 From £270 PLM
inc. VAT

Standard Square rear edge Breakfast Bar
21mm to 200mm thick
MPM004

MPM004 From £66 PLM
inc. VAT

Standard Square edge profile
61mm to 200mm thick
MPM002

MPM002 From £336 PLM
inc. VAT

Rear edge integrated up-stand
50mm or 100mm
MPM005

MPM005
50m From £78 PLM inc. VAT
100m From £96 PLM inc. VAT

Water fall edge profile
40mm to 60mm thick
MPM003

MPM003 From £336 PLM
inc. VAT

Standard unwrapped rear edge

MPM006

MPM006
FOC

To obtain a quotation for your made to measure worktop either: contact ( email) mpm-engineering or telephone: 01582-582811.

 

Additional options and prices:

  1. To cut a hole for a sink or drainer--------------------------------@ £60   MPM007
  2. To weld in a Sink or drainer (sink, drainer not included)-------@ £216  MPM008
  3. Mechanical corner or straight slot joint--------------------------@ £78    MPM009
  4. On site templating available from--------------------------------@ £294  MPM010
  5. On site installation available from--------------------------------@ £294  MPM011

 

Sinks and Drainers

 

Our Full range of Sinks and Drainers

 

15mm Tight Radius Bowls

 

15mm Tight Radius Bowl

 

MPM-100-502 - 500 x 400 x 200 Deep

MPM-100-501 - 500 x 400 x 180 Deep

MPM-100-452 - 450 x 400 x 200 Deep

MPM-100-451 - 450 x 400 x 180 Deep

MPM-100-402 - 400 x 400 x 200 Deep

MPM-100-401 - 400 x 400 x 180 Deep

MPM-100-342 - 340 x 400 x 200 Deep

MPM-100-341 - 340 x 400 x 180 Deep

Extra Deep Bowl

 

Extra Deep Bowls

 

MPM-100-ED502 - 500 x 400 x 250 Deep

MPM-100-ED402 - 400 x 400 x 250 Deep

 

Half Bowl

MPM-100-ED315 - 150 x 300 x 150 Deep

Extra Large Bowl

 

Extra Large Bowl

 

MPM-604-S - 800 x 420 x 220 Deep

25mm Radius Bowl

 

25mm Radius Bowls

 

MPM-110-55  - 550 x 400 x 190 Deep

MPM-110-45  - 450 x 400 x 190 Deep

MPM-603-S    - 500 x 400 x 200 Deep

MPM-602-S    - 400 x 400 x 180 Deep

MPM-110-34  - 340 x 400 x 175 Deep

 

 

Half Bowl

MPM-110-16 - 160 x 340 x 130 Deep

 

 

Full Depth Half Bowl

MPM-601-S   - 180 x 400 x 145 Deep

MPM-110-20 - 200 x 400 x 150 Deep

 

 

 

Drainer

MPM- Sloping drainer

Indent sloping drainer
 

Bowls With Drainers

Bowl with Drainer - RF700

 

MPM-700-S

O/A Size 1000 x 500

Bowl 405 x 400 x 190 Deep

 
Bowl with Drainer - RF750

MPM-750-S

O/A Size 1000 x 500

Bowl 390 x 400 x 190 Deep

Bowl 190 x 320 x 160 Deep

 

110 Round Bowl

 

Hand Wash Bowl

MPM-260 - 260mm Diameter
MPM-300 - 300mm Diameter
MPM-360 - 360mm Diameter
MPM-380 - 380mm Diameter
MPM-420 - 420mm Diameter

 

Made to Measure Stainless Steel Worktop and Island
Made to Measure Stainless Steel Worktops with Sink
Made to Measure Stainless Steel Worktop Island with Sink

To obtain a quotation for your made to measure worktop either: contact ( email) mpm-engineering or telephone: 01582-582811.

Our worktops are manufactured from catering grade 304 austenitic silicone finish brushed stainless steel. The worktops are most commonly backed with a moisture resistant MDF to give added support and easy fixing to the base cupboards. As MPM have achieved FSC accreditation all the timber used within our products comes from sustainable sources. With the latest in welding technology we have the ability of integrating most types of undermount bowls including some with drainers. Please see individual bowl details for sizes. Individual stainless steel worktop lengths are governed by the sheet blank size available which is 3 metres. Our worktops can incorporate drainer grooves or pimples, sunken waterfall areas, built-in upstands along with hob cut outs and slot joints. Please feel free to contact our design team either by email or Tel: 01582 582811 to discuss our made to measure service.

Construction: Manufactured from grade 304 silicone finish brushed stainless steel.

We have considered all aspects of both commercial and domestic stainless steel worktop design when creating our stainless steel kitchen worktops. We offer a free of charge design service working closely with our customers to manufacture stainless steel worktops to fit their individual needs.

Storage of stainless steel worktops: We recommend that the plastic coating protecting the stainless steel must be left intact until installation is completed.

Templating of stainless steel worktops: We offer a full templating service for our stainless steel worktops. Our fitters will visit your premises and produce workable templates which your worktops will be manufactured from. Please ask for templating prices.

Fitting stainless steel worktops: We offer an installation service for our worktops but we do not undertake any plumbing, gas or electrical connections. Please ask for prices. Stainless steel worktops should only be fitted in areas that experience normal cooking ranges of temperature and humidity. Particular care should be taken in newly built areas to ensure a stable atmosphere. All windows/doors should be in place, plasterwork fully dried and major works completed prior to installation.

Cleaning and care for stainless steel worktops: Chlorides such as bleach or common salt and acids of any kind can damage all grades of stainless steel surfaces. If a spillage occurs rinse immediately and thoroughly with plenty of fresh water and then dry with a soft cloth. Metal objects that may rust should never be left in contact with stainless steel. To maintain the best appearance of your stainless steel worktops, only use warm water and a mild detergent ensuring that the surface is rinsed thoroughly and then dried with a soft cloth.

IMPORTANT: Care should be taken when handling and installing these products. For your safety, we recommend that hands are protected from unfinished edges and corners.

This is the basket Message

This is the basket Message