- Stainless steel splashbacks
- Stainless steel worktops
- Bespoke worktops & splashbacks
- Stainless steel doors & drawers
- Stainless steel wall tiles
- Stainless steel shelves
- Stainless steel single tier chef's rack
- Stainless steel two tier chef's rack
- Stainless steel upstands for worktops
- Stainless steel plinth & pilasters
- Stainless steel kitchen base & wall cabinets
- MPM hybrid stainless steel & MFC kitchen base & wall cabinets
- Adhesive & cleaner
Made to Measure Stainless Steel Worktops
from £270 (per linear metre) inc VAT
Front edge profiles/thickness |
Rear edge profiles/height |
|
Square edge 22 to 60mm thick |
|
|
Square edge 60 to 200mm thick
|
 Profile RC Breakfast Bar £66 PLM |
|
Water fall edge 40 to 60mm thick
|
Profile RD=50mm £78 PLM |
Profile FA as standard
Profile RA as standard 
Profile RB 50mm H x 10mm thick
Profile FB
Profile FC
Below is a small selection of the sinks and drainers we have available for integration
 KBX 110 16 160x340x130 £223.00 |
 KBX 110 34 340x400x175 £252.00 |
 KBX 110 55 550x400x190 £344.00 |
 RF 700S860x500 405x400x190 £494.00 |
 KBX 110 20 200x400x150 £251.00 |
 KBX 110 45 450x400x180 £296.00 |
 KBX 160 34 16340x400x175 160x340x130 £413.00 |
 KBX 104 45 Drainer 450x400x25 £237.00 |
Worktop Specification
1.2mm brushed stainless steel with an moisture resistant MDF core. All edges wrapped with a 13mm safety edge underneath.
To obtain a quotation for your made to measure worktop either: contact ( email) mpm-engineering or telephone: 01582-582811.
Delivery only will be chargeable: Please provide a delivery postcode when requesting a quotation.
Additional options available and prices
Sink, drainer or hob cut out only @ £60 each
Sink cut out & sink / drainer integration @ £216 each
(sink not included)
Drainer cut out @ £60
Corner or straight Slot joint @ £75.60 each
Rear profile RA comes as standard at no extra charge
Rear profile RB @ £54 per linear metre
Rear profile RC @ £66 per linear metre : Breakfast bar edge
Rear profile RD @ £78 per linear metre
Rear profile RE @ £96 per linear metre
On site templating available from: £294
Installation available from £294
All prices are inclusive of VAT @ 20%
