Hybrid 500mm wide x 720mm high Wall Units
Complete Unit LH or RH Hinged Door.
All Wall cabinets come as standard with doors, handles and 1 shelf, grade 304 brushed stainless steel.
- Information Sheet
MPM offer a comprehensive range of Hybrid base and wall cabinets. This range takes advantage of using standard ridged glued and dowled MFC carcasses and then cladding all the visual faces with stainless steel thus giving the apperance of being all stainless steel but without the cost. This range offers a cost saving of 20% over the full stainless steel version.
Our units come complete with hinged doors, handles, adjustable feet and plinth as standard.
Please feel free to contact us to discuss our made to measure service for any unit sizes falling outside our standard range.
Construction: Titanium coloured 18mm melamine faced chipboard clad on external faces with grade 304 silicone finish brushed stainless steel. Our design team have considered all aspects of both commercial and domestic kitchen design when creating our standard range of stainless steel hybrid kitchen base and wall units. Whilst we offer a comprehensive range of standard hybrid stainless steel kitchen base and wall units we also understand that sometimes this will not always be suitable for every situation. To this end we offer a free of charge design service working closely with our customers to manufacture hybrid stainless steel base and wall units to fit their individual needs.
Storage of hybrid stainless steel base and wall units: Items must be stored at normal room temperature and humidity. We recommend that the plastic coating protecting the stainless steel must be left intact until installation is completed.
Fitting hybrid stainless steel base and wall units: Hybrid stainless steel base and wall units should only be fitted in areas that experience normal cooking ranges of temperature and humidity. Particular care should be taken in newly built areas to ensure a stable atmosphere. All windows/doors should be in place, plasterwork fully dried and major works completed prior to installation.
Maintenance for hybrid Stainless steel base and wall units: From time to time it may be necessary to re-adjust the hinges and drawer runners to keep everything in line. This is a simple task and can be done with nothing more than a Phillips screwdriver.
Cleaning and care for hybrid stainless steel base and wall units: Chlorides such as bleach or common salt and acids of any kind can damage stainless steel surfaces. If a spillage occurs rinse immediately and thoroughly with plenty of fresh water and then dry with a soft cloth. Metal objects that may rust should never be left in contact with stainless steel. To maintain the best appearance of your stainless steel base and wall units, only use warm water and a mild detergent ensuring that the surface is rinsed thoroughly and then dried with a soft cloth.
IMPORTANT: Care should be taken when handling and installing these products. For your safety, we recommend that hands are protected from edges and corners.